TPLI METAL CASTING INDUSTRIAL SDN. BHD.
 
   
 
get flash
To view this website you need to have JavaScript enabled in your browser and have the flash player 8 or higher installed.
To install the latest flash player, click the icon below, install the flash plugin and then click here to refresh this page.
Gate Valve
Non-Rising Stem, Resilient Seated, Ring-key Operated (Type B)

Design
> The design allows replacement of the sealing system when the valve under pressure and in fully open position.
> Dust seal prevent ingress of foreign matter.
> Gunmetal Thrust Collar provides stem guidance and low friction bearing on opening and closing torque.
> Superior Stem made from Stainless Steel 431S29 promises more operation cycle.

Technical Specification:
Nominal Size: DN 50 -DN 400
Nominal Pressure: PN 16 (other rating also available on request)
Drilling Flange: BS EN 1092-2, PN 16 (other flange standard also available on request)
Protection: Fusion Bonded Epoxy Coated (min 250 μm)
Working Temp.: Maximum 70°C
Country of Origin: Malaysia

Material Specification:
No. Component Reference Standard
1. Bolt High Tensile Steel, BS 10083-1, Gr 8.8
2. Stem Cap Ductile Iron, BS EN 1563, EN-GJS-500-7
3. Stem Stainless Steel, BS 10083-3, 431S29
4. Dust Seal EPDM, BS EN 681-1, Type WA
5. Cover Ductile Iron, BS EN 1563, EN-GJS-500-7
6. Soft seal EPDM, BS EN 681-1, Type WA
7. Thrust Collar Gunmetal, BS 12163, LG 2
8. Bonnet Ductile Iron, BS EN 1563, EN-GJS-500-7
9. Gasket EPDM, BS EN 681-1, Type WA
10. Wedge Nut Gunmetal, BS 12163, LG 2
11. Wedge Ductile Iron vulcanized with EPDM rubber
12. Body Ductile Iron, BS EN 1563, EN-GJS-500-7
Note:
Stainless Steel Bolt and Nut available through request
Download Catalogue

Download
Resilient Seated Gate Valve Catalogue

Request for Price
 
Gate Valve
Non-Rising Stem, Metal Seated

Design
> The design allows replacement of the sealing system when the valve under pressure and in fully open position.
> Sealing system which allows the seal replacement even through the valve under pressure and in fully open position.
> Gunmetal Thrust Collar provides stem guidance and low friction bearing on opening and closing torque.
> Superior Stem made from Stainless Steel 431 S29 promises more operation cycle.

Technical Specification:
Nominal Size: DN 350 - DN 1000
Nominal Pressure: PN 16 (other rating also available on request)
Drilling Flange: BS EN 1092-2, PN 16 (other flange standard also available on request)
Protection: Cold Applied Epoxy Coated (min 250μm) or Fusion Bonded Epoxy (min 250μm)
Working Temp.: Maximum 70°C
Country of Origin: People Republic of China

Material Specification:
No. Component Reference Standard
1. Handwheel Ductile Iron, BS EN 1563, EN-GJS-500-7
2. Gear Housing Ductile Iron, BS EN 1563, EN-GJS-500-7
3. Mounting Flange Ductile Iron, BS EN 1563, EN-GJS-500-7
4. O'ring EPDM, BS EN 681-1, Type WA
5. Thrust Collar Gunmetal, BS 12163, LG 2
6. Stem Stainless Steel, BS 970-1, 431S29
7. Bonnet Ductile Iron, BS EN 1563, EN-GJS-500-7
8. Bolt and Nut Hot Dip Galvanized Steel, BS 916
9. Wedge Nut EPDM, BS EN 681-1, Type WA
10. Wedge Seal Ring Gunmetal, BS 1400, LG 2
11. Wedge Ductile Iron, BS EN 1563, EN-GJS-500-7
12. Body Seal Ring Gunmetal, BS 1400, LG 2
13. Body Ductile Iron, BS EN 1563, EN-GJS-500-7
Note:
Stainless Steel Bolt and Nut available through request
Download Catalogue

Download
Metal Seated Gate Valve Catalogue

Request for Price
Home Back
Our Products
Info Centre
 
 
Home | Products | Achievement | Member Area | Contact Us
© 2010 TPLI METAL CASTING INDUSTRIAL SDN. BHD.. All Rights Reserved.